Abrasive wet cutting method generally used a grinding wheel to be cut, based on the need to cut the material, you may need to use a grinding wheel with different ingredients. The choice of the grinding wheel also subject to the influence of the material hardness and toughness.
Abrasive wet cutting method

Abrasive wet cutting method generally used a grinding wheel, cutting, grinding wheel containing abrasives and adhesives. Cutting disc cutting, grinding wheel, coolant flush to prevent sample damage due to frictional heat. In addition, the cooling liquid is also cleared the cutting area of ??the chip.

Grinding wheel round choice

Based on the need to cut the material, you may need to use a grinding wheel with different ingredients. The choice of the grinding wheel also subject to the influence of the material hardness and toughness. Split ceramic or carbide materials should be chosen by the metal or Bakelite adhesive bonded diamond cutting disc.

Bakelite adhesive alumina (Al2O3) grinding wheel is a typical black metal material cutting. Cubic boron nitride (CBN) are increasingly used in higher hardness of ferrous materials cutting. Non-ferrous metal cutting should be selected by Bakelite adhesive-bonded silicon carbide (SIC) grinding wheel.

Cutting wheel design

In addition to the design of the grinding wheel, should also consider the need to consider the abrasive diamond / CBN cut the plate and SiC/Al2O3 difference between the cut piece. Abrasive high hardness and durable adhesive fixed abrasive diamond / CBN cutting wheel performance is very durable. Metal disc surrounding the sticky only a thin layer of abrasive (continuous rim). These cutting wheel is a long-term consumable cutting discs. SiC and Al2O3, other abrasive wear rate is relatively fast and relatively inexpensive. Thus, the entire body of the grinding wheel of abrasive material and a binder composition. This cutting wheel is known as the consumable cutting discs.