Automatic machining line, some of the replacement tool by tool management sector adjustment is completed, but the the spatula departments sometimes may appear negligence, to say the processing line tool is very similar, believe it could lead to the tune tool appears to take wrong phenomenon, in order to do a good job the last time before the trial cutting checks to prevent the processing of the first pieces of scrap, then deal with the tool to do the following work:

Spatula before checking the new tool. The operator according to the processing conditions (processing size, processing and roughness of the workpiece) and tool set life decided to swap the tool. Machining automatic processing line in accordance with the requirements of the processed products, a wide range of cutting tools with composed and all links are likely to bump tool, metal cutting wheel,adjust the tool operating on errors, and so are not the same, so check the contents of the various tool. My factory V6 cylinder line processing line where the visual inspection of the contents of the five tools:

Drill tool:

a. whether the calibration stickers vouchers;
b. whether the size of the spatula is 144.00mm;
c. HSK shank bump traces;abrasive wheel
d grinding tool is normal (main cutting edge white line, the chisel width 0.80mm, the vice behind Alice prime);
e HSK coolant to take over the installation or loose

Coating technology for cutting tools are divided into two categories PVD (physical coating) and CVD (chemical coating). PVD is divided into the vacuum coating, sputtering and ion plating. Coating technology used in the cutting tool when the treatment temperature of the CVD process close to 1000 ℃, having a sharp tip of the cutting tool, such high temperatures will reduce tool matrix hardness, easy to cause deformation and breakage; vacuum coating, and cathode sputtering process the presence of the main problem is that the lower the bonding strength of the coating and the substrate; ion plating to obtain a high bonding strength of the coating in order to lower processing temperatures, and is well suited for the cutting tool.
The cutter blade is preferably

Cutting performance of the blade to improve efficiency, reduce the cost of the tool. Domestic Zhuzhou, Zigong, hard,grinding wheel, Shaanxi hard famous blade manufacturer M2 YS25, SC30, YT535, YG546, YG532, P25, Y330, Y320 and many other laboratory test cut and leaf processing in production, test kinds of insert grades, test Hitachi CY250 HC844, the Mitsubishi UP20M F620, Walter WTA51, WTL71 Sandvik 4030,235, Kennametal K68, Iscar IC328 company more than 10 kinds of brands, preferably Eastman card and Hitachi blade, the waveform edge Groove IC328 blade roughing better, the CY250 semi-finish milling, precision milling is better. Two blades prices low, and excellent durability.cut off wheel